HEATERS FOR INDUSTRY

Do you have an industrial hall or a workplace where it is unpleasantly cold during the winter months and that you would like to heat up? Or are you working on a building site and is your screed not drying as quickly as hoped? At Buildingdryers.be you can rent a heater for industry use, so that your space is heated up in no time at all! Gas heaters, electric heaters and direct or indirect fired heaters: we will be happy to explain you the difference.

Heating of building sites

Getting your building quickly dry is often an extra challenge during the cold winter months. The lower temperatures usually cause the building moisture to evaporate more slowly, so that your screed will take longer to dry than you may have anticipated. The addition of hot air blowers or electric or gas heaters, for example, will cause the temperature to quickly rise by a few degrees, so that your screed will dry out more quickly. Are you looking for professional heating for industry use? Buildingdryers.be is the right address!

Heating of industrial halls

Hot air blowers or heaters are also perfectly suited to get your large industrial hall at the ideal temperature for a major event. For the heating of industrial halls it is best to choose an electric heater from 3 kW to 18 kW or an indirect fired hot air blower from 50 kW to 250 kW. Feel free to contact Buildingdryers.be for advice on the various available options!

Heating of party tents

Do you have a large party tent that you want the heat? Here, too, you can install electric or gas heaters. Buildingdryers.be offers a wide range of heaters. For heating party tents, indirect fired hot air blowers are ideal because they are installed outside the space to be heated, so that smoke and combustion products are discharged to the atmosphere. The clean, odourless hot air is then blown into the tent. These indirect heaters run on oil or diesel.