When in need of temporary small-scale cooling, an efficient and easily implemented solution is required. The ACT 7 mobile water-cooled air conditioner can deliver efficient cooling in a matter of minutes with no cooling knowledge or special training required to install the unit.
Whole-room cooling
In contrast to most air-cooled units, the ACT 7 will provide whole-room cooling without the need to continually exhaust internal air.
In addition, the unit does not require mounting of an exhaust air duct to an outside wall. Getting the ACT 7 up and running is simply a matter of connecting the cooling line con¬nec¬tors to the outdoor heat rejection unit.
How it works
The ACT 7 absorbs the heat into a refrigerant cooling system. From there, the heat is transferred to the self-containing chilled water/glycol system. It is then pumped through to the outdoor unit where the water is cooled and the heat dissipates.
The indoor unit is connected to the outdoor unit via two 22mm quick-connect, self-sealing flexible hoses. These hoses are supplied in 5m or 15m lengths and can be connected to a maximum length of 30m.
When in need of temporary small-scale cooling, an efficient and easily implemented solution is required. The ACT 7 mobile water-cooled air conditioner can deliver efficient cooling in a matter of minutes with no cooling knowledge or special training required to install the unit.
Whole-room cooling
In contrast to most air-cooled units, the ACT 7 will provide whole-room cooling without the need to continually exhaust internal air.
In addition, the unit does not require mounting of an exhaust air duct to an outside wall. Getting the ACT 7 up and running is simply a matter of connecting the cooling line con¬nec¬tors to the outdoor heat rejection unit.
How it works
The ACT 7 absorbs the heat into a refrigerant cooling system. From there, the heat is transferred to the self-containing chilled water/glycol system. It is then pumped through to the outdoor unit where the water is cooled and the heat dissipates.
The indoor unit is connected to the outdoor unit via two 22mm quick-connect, self-sealing flexible hoses. These hoses are supplied in 5m or 15m lengths and can be connected to a maximum length of 30m.
Warehouse address
Briel 17
9200 Baasrode
Company seat
Houtenmolenstraat 69B
B-9255 Buggenhout